Small laser scanner checkerboard target
Checkered pattern; dimensions: 24 x 21cm (9.4 x 8.3 in); available with various connections connecti...
€85EUR
Tripod adapter with 3/8 inch connection for FARO Focus
Adapter for attaching a FARO Focus to a tripod with claw system. Due to this adapter, rapid and safe...
€84EUR
5 magnetic checkerboard targets as a set
Checkerboard targets with magnetic back side Useful: Due to the magnetic back side, the laser scann...
€82EUR
3D measurement point sticker (100 piece)
Stickers for permanent marking of your reference sphere positions Fast: Pull off and affix the stic...
€76EUR
Trimble checkerboard target with 5/8" thread
The checkerboard target is optimally suited for georeferencing your scan project when using a Trimbl...
€74EUR
Tallysman GNSS antenna for Reach M+
Tallysman TW4721 is a compact, broadband GNSS antenna with Accutenna™ technology. It provides accura...
€65EUR
checkerboard stickers (highly adhesive) as a set
Do you also think that printed checkerboard targets attached with crepe tape are cumbersome to attac...
€65EUR
Checkerboard stickers (removable) as a set
Do you also think that printed checkerboard targets attached with crepe tape are cumbersome to attac...
€65EUR
Suction cup holder for reference spheres
The innovative suction cup holder allows the attachment of reference spheres to smooth surfaces. At...
€62EUR
EMLID Reach M2/M+ camera hot shoe adapter
The hot shoe adapter allows the EMLID Reach M+ / M2 to be connected to a camera via JST-GH cables, w...
€53EUR
Set of 25 statically charged Easy-Targets for FARO Freestyle 2 & photogrammetry
Statically charged checkerboards for attachment to almost any surface You work with optical scanner...
€49EUR
Set of 3 flat feet for carbon tripod
Accessory for carbon tripod 030-10126 / 030-10129 / 030-11503 / 030-50003 The flat feet are an alte...
€49EUR
Leica adapter to 5/8 inch thread
Adapter from Leica stud bolt (12mm diameter) to 5/8" male thread Do you have Leica prism poles in y...
€48EUR
Adapter 3/8" female thread to 5/8" male thread
Adapter with 3/8" female thread and 5/8" male thread You have a 3/8" thread but need a 5/8" thread? ...
€46EUR
Pole mount for reference marks
The pole mount is specially designed for use with surveying accessories with magnetic base. The brac...
€44EUR
Small tripod adapter (5/8" to 3/8")
Adapter for attaching a FARO Focus scanner to a telescope tripod with 5/8" thread Do you need to att...
€41EUR
EMLID Reach RS+/RS2 Cable 2m with DB FEMALE Connector (90°)
The connection cable with L-shaped Lemo connector is only intended for connection to the EMLID Reach...
€40EUR
EMLID Reach RS+/RS2 Cable 2m with DB9 FEMALE Connector
The connection cable with a straight Lemo connector is used to connect to the EMLID Reach RS+/RS/RS2...
€40EUR
EMLID Reach RS+/RS2 Cable 2m with DB MALE Connector (90°)
The connection cable with L-shaped Lemo connector is only intended for connection to the EMLID Reach...
€40EUR
EMLID Reach RS+/RS2 Cable 2m with DB9 MALE Connector
The connection cable with a straight Lemo connector is used to connect to the EMLID Reach RS+/RS/RS2...
€40EUR
EMLID Reach RS2 extension pole
The 150mm extension for the Reach RS2 can be mounted below the GNSS antenna. It is mainly used to en...
€39EUR
Set of 3 rubber feet for carbon tripod
Spare part for carbon tripod 030-10126 / 030-10129 / 030-11503 / 030-50003 We offer the rubber feet...
€36EUR
EMLID Reach RS+/RS2 Cable 2m w/o 2nd Connector (90°)
The connection cable with L-shaped Lemo connector is only intended for connection to the EMLID Reach...
€33EUR
EMLID Reach RS+/RS2 Cable 2m w/o 2nd Connector
The connection cable with a straight Lemo connector is used to connect to the EMLID Reach RS+/RS/RS2...
€33EUR
AESUB orange - Long-lasting anti-reflective spray for 3D laser scanning
Do you want to scan an object that can hardly or not at all be captured by a 3D scanner? The object ...
€33EUR
Prism pole adapter 5/8 inch for reference spheres XXL (200mm/7.87 in)
Adapter (length: 72.5mm (2.85 in)) with 5/8 inch male thread and M8 thread for reference spheres XXL...
€31EUR
Prism pole adapter 5/8 inch for reference spheres (145mm/5.7 in)
Adapter (length: 100mm (3.9 in)) with 5/8 inch male thread and M8 thread for reference spheres You ...
€31EUR
AESUB blue - Anti-reflective spray for 3D laser scanning
AESUB blue – Vanishing scanning spray Do you want to scan an object that can hardly or not at all b...
€30EUR
AESUB green 1 liter - Long-lasting anti-reflective spray for 3D laser scanning
AESUB green – Vanishing scanning spray in a container – Long-lasting Do you want to scan a vehicle,...
€28EUR
Locking plates (white spacers) - Spare parts for carbon tripod
Spare parts for carbon tripod We offer the locking plates as spare parts for our carbon tripod. The...
€25EUR
Rubber feet for telescope tripods - Set consisting of 3 feet
Feet are suited for telescope tripods and 2-way tripod
€22EUR
Set of 3 spikes for carbon tripod
Spare part for carbon tripod 030-10126 / 030-10129 / 030-11503 / 030-50003 The spikes are spare par...
€19.95EUR
EMLID Reach M+/M2 TNC Antenna Adapter Cable 0.5m
The adapter cable is compatible with the original Reach module.
€16EUR
Reference Sphere Pedestal with Magnet Plate
Pedestal for safe positioning of a reference sphere Do you want to position your reference spheres ...
€16EUR
AESUB white – Anti-reflective spray for 3D laser scanning
AESUB white – Semi-permanent scanning spray Do you want to scan an object that can hardly or not at...
€14.5EUR
EMLID Reach RS2 Thread Adapter
Thread adapter with 1/4" internal thread (photo tripod thread) to 5/8" external thread. The height o...
€14EUR
EMLID Reach M+/M2 Antenna Extension Cable 2m
Use this extension cable to connect a multi-band GNSS antenna to the EMLID Reach M2/M+. The cable is...
€14EUR
Reach M2/M+ JST-GH to 6p-6p Cable for Pixhawk 2
This accessory cable (6-pin) connects the EMLID Reach M+/M2 GNSS module to the Pixhawk 2 UAV control...
€11EUR
Reach M2/M+ JST-GH to DF13 6p-6p Cable for Pixhawk 1
Use this connection cable to connect the EMLID Reach M+/M2 GNSS module to the Pixhawk 1 UAV controll...
€11EUR
EMLID Reach M+/M2 SMA Antenna Adapter Cable 0.5m
Use this connection cable to connect the multi-band GNSS antenna to the Reach M2 /M+ module.
€11EUR