3D MEASUREMENT POINT STICKER (100 PIECE)

Fast: Pull off and affix the sticker, fix the reference sphere clearly - again and again
Comfortable: Clear marking of your reference points; thus, measurements can be devolved partially
Flexible: Reference points can always be detected and used again

With the reference sticker, work is simplified. Mark your reference points and get back to them again and again if needed.

Product characteristics:

Diameter Ø 50mm with printed ring Ø40mm - matching our magnets
Self-adhesive on one side
Strongly adhesive, even on rough, fibrous surfaces
Waterproof, weatherproof and aging resistant
Please note that the measuring marks are made of flexible fabric material with rubber adhesive. In case of strong temperature fluctuations, especially in the cold season, this can lead to dimensional changes.
Imprint of two centric circles with Ø 40mm and Ø 42mm for optimal placement of the magnet.
The 40mm circle is suitable at normal temperatures. In cold temperatures or when the stickers are applied for several years, the natural fabric contracts and the 42mm circle must be used.
Temperature resistance (30 min.) 130°C
Shelf life: approx. 12 months when stored in a cool and dry place. Temperature fluctuations and heat exposure should be avoided.
Removable die-cut sticker (center hole) Ø10mm
Sticker consecutively numbered, for clear identification
Silicone-free (can also be used in the paint sector)
Indication "Do not remove" as a symbol and printed in 3 languages.
Designated use:

Fix sticker and, thus, attach reference spheres and prisms again and again at the same point
Markings for magnetic holder and threaded bolt
Field of application:

Architecture, preservation of buildings and monuments
Design and planning of factory buildings and digital factory
Mining industry and tunnel construction
Public service corporations
Aircraft construction and naval architecture
Foundries and steel industry
Chemistry and process industry
Forensics
Compatibility:

For all Laserscanning Europe reference spheres, checkerboard targets and mini prism with a magnet.
Delivery contents:

100 reference stickers in a roll (one row)
Indications:

For each position, at least three spheres are required. In the case the scanner is repositioned, it is partially necessary to relocate the spheres. Due to the marking on the stickers, an exact centering is possible again and again.
The consecutive number on the stickers is suited for a clear identification of the reference spheres for the purpose of registration and determination of coordinates via total station.