Store homepage (319)

Adapter 3/8" female thread to 5/8" male thread

Adapter with 3/8" female thread and 5/8" male thread You have a 3/8" thread but need a 5/8" thread? ...

Universal tribrach adapter

Rigid tribrach adapter (5/8") with claw system This universal tribrach adapter is suited for many a...

Pole mount for reference marks

The pole mount is specially designed for use with surveying accessories with magnetic base. The brac...

Laser scanning traffic cone

Traffic cone for positioning reference spheres Do you want to position your reference spheres easil...

Small tripod adapter (5/8" to 3/8")

Adapter for attaching a FARO Focus scanner to a telescope tripod with 5/8" thread Do you need to att...

EMLID Reach RS+/RS2 Cable 2m with DB FEMALE Connector (90°)

The connection cable with L-shaped Lemo connector is only intended for connection to the EMLID Reach...

EMLID Reach RS+/RS2 Cable 2m with DB9 FEMALE Connector

The connection cable with a straight Lemo connector is used to connect to the EMLID Reach RS+/RS/RS2...

EMLID Reach RS+/RS2 Cable 2m with DB MALE Connector (90°)

The connection cable with L-shaped Lemo connector is only intended for connection to the EMLID Reach...

EMLID Reach RS+/RS2 Cable 2m with DB9 MALE Connector

The connection cable with a straight Lemo connector is used to connect to the EMLID Reach RS+/RS/RS2...

EMLID Reach RS2 extension pole

The 150mm extension for the Reach RS2 can be mounted below the GNSS antenna. It is mainly used to en...

LED warning light

More safety in darkness; rechargeable signal light; incl. charger The LED warning light provides op...

Set of 3 rubber feet for carbon tripod

Spare part for carbon tripod 030-10126 / 030-10129 / 030-11503 / 030-50003 We offer the rubber feet...

EMLID Reach RS+/RS2 Cable 2m w/o 2nd Connector (90°)

The connection cable with L-shaped Lemo connector is only intended for connection to the EMLID Reach...

EMLID Reach RS+/RS2 Cable 2m w/o 2nd Connector

The connection cable with a straight Lemo connector is used to connect to the EMLID Reach RS+/RS/RS2...

AESUB orange - Long-lasting anti-reflective spray for 3D laser scanning

Do you want to scan an object that can hardly or not at all be captured by a 3D scanner? The object ...

Height adapter

Adapter for simultaneous use of reference spheres with 145mm and 200mm diameter; 27.5mm length The ...

Prism pole adapter 5/8 inch for reference spheres XXL (200mm/7.87 in)

Adapter (length: 72.5mm (2.85 in)) with 5/8 inch male thread and M8 thread for reference spheres XXL...

Prism pole adapter 5/8 inch for reference spheres (145mm/5.7 in)

Adapter (length: 100mm (3.9 in)) with 5/8 inch male thread and M8 thread for reference spheres You ...

AESUB blue - Anti-reflective spray for 3D laser scanning

AESUB blue – Vanishing scanning spray Do you want to scan an object that can hardly or not at all b...

AESUB green 1 liter - Long-lasting anti-reflective spray for 3D laser scanning

AESUB green – Vanishing scanning spray in a container – Long-lasting Do you want to scan a vehicle,...

Locking plates (white spacers) - Spare parts for carbon tripod

Spare parts for carbon tripod We offer the locking plates as spare parts for our carbon tripod. The...

Foam protection for FARO laser scanner mirror

Safe transport for all FARO laser scanners of the FocusS and FocusM series! The precisely fitting f...

Rubber feet for telescope tripods - Set consisting of 3 feet

Feet are suited for telescope tripods and 2-way tripod

EMLID Reach RS2 LoRa antenna

With the LoRa antenna you send correction data over a maximum range of 8 km from base to rover. The ...

Set of 3 spikes for carbon tripod

Spare part for carbon tripod 030-10126 / 030-10129 / 030-11503 / 030-50003 The spikes are spare par...

EMLID Reach M+/M2 TNC Antenna Adapter Cable 0.5m

The adapter cable is compatible with the original Reach module.

Reference Sphere Pedestal with Magnet Plate

Pedestal for safe positioning of a reference sphere Do you want to position your reference spheres ...

AESUB white – Anti-reflective spray for 3D laser scanning

AESUB white – Semi-permanent scanning spray Do you want to scan an object that can hardly or not at...

EMLID Reach RS2 Thread Adapter

Thread adapter with 1/4" internal thread (photo tripod thread) to 5/8" external thread. The height o...

EMLID Reach M+/M2 Antenna Extension Cable 2m

Use this extension cable to connect a multi-band GNSS antenna to the EMLID Reach M2/M+. The cable is...

Set consisting of two case locks (spare part)

Set consisting of two case locks

Reach M2/M+ JST-GH to 6p-6p Cable for Pixhawk 2

This accessory cable (6-pin) connects the EMLID Reach M+/M2 GNSS module to the Pixhawk 2 UAV control...

Reach M2/M+ JST-GH to DF13 6p-6p Cable for Pixhawk 1

Use this connection cable to connect the EMLID Reach M+/M2 GNSS module to the Pixhawk 1 UAV controll...

EMLID Reach M+/M2 SMA Antenna Adapter Cable 0.5m

Use this connection cable to connect the multi-band GNSS antenna to the Reach M2 /M+ module.

Rod level with integrated circular level

Adjustable rod level for vertical positioning of the ranging pole Do you already have acquired a ra...

Warning kilt for tripod

Reflective vest for your tripod - for higher level of security Using the tripod warning kilt, you o...

Standard magnet bolt for reference sphere; M8 thread; length 12mm

Product characteristics adhesion: 125N (corresponds to 13kg) diameter: 40mm height of magnet: 8mm c...

Butler for plummet hook

Magnetic hook for attachment of LED warning light Using the butler for plummet hook, you can attach...

3D measuring point disk for attaching reference spheres on walls, concrete or wooden surfaces

Metallic marking disks, appropriate for all reference spheres with magnet base In your laser scanni...

OptimScan-5M Metrology 3D Tarayıcı

Features Blue Light Scanning Technology OptimScan-5M Metrology 3D Scanner equipped with Blue Light T...

Shining 3D RobotScan E0505

RobotScan E0505 is a professional 3D scanner OptimScan-5M, which is combined with a robot arm from t...

Imager 5006

The IMAGER 5006 laser scanner developed by Zoller+Froehlich GmbH (Z+F) continues the successful IMAG...

Imager 5006h

Laser scanning systems are high-tech equipment with a non-reflective rangefinder, which makes the mo...

Imager 5006EX

The Z+F IMAGER 5006EX laser scanner is the first and so far the only explosion-proof device in the i...

Imager 5010

The laser scanner Z+F IMAGER® 5010 is the result of many years of work by the German company Zoller ...

Imager 5010C

The Z+F IMAGER® 5010C laser scanner from the German company Zoller + Fröhlich (Z+F) opens up new pos...

Imager 5010X

Z+F has released an updated scanner model - IMAGER® 5010X. In addition to the acclaimed Z+F IMAGER® ...

Imager 5016

Z+F's new IMAGER®5016 laser scanner combines light weight - no more than 7.5 kg with two built-in ba...

Faro Focus3D S120

FARO Focus3D S: Small, light, user-friendly The Focus3D S is a high-speed 3D scanner for detailed m...

FARO Focus3D X 30

FARO Focus 3D X30 Overview The ultra-portable Faro Focus3D X 30 enables fast, straightforward and a...