Accessories | Everything for 3D Scanning

ALGIZ RT8 TWO-SLOT BATTERY CHARGER

The two-slot battery charger for the Algiz RT8 gives us the ability to charge two batteries at the s...

MULTI-BAND ANTENNA KIT FOR EMLID REACH M2

The multi-band GNSS antenna for Reach M2 receives the L1/L2 bands on GPS, GLONASS, BeiDou and E1/E5 ...

NAUTIZ X6 BARCODE SCANNER EXPANSION

The barcode scanner expansion for the Nautiz X6 provides the ability to scan barcodes with the very ...

SET OF 20 MAGNETIC APRILTAGS (15 X 15CM)

AprilTags are used as visual control point markers in photogrammetry, robotics and augmented reality...

EMLID FLOW + SURVEY ANNUAL LICENSE

EMLID Flow is an app for land surveying in combination with EMLID GNSS antennas. Configure your dev...

NESTLE GNSS two-segment GNSS pole

The required accuracy in data acquisition requires the use of a professional antenna plumb bob. The ...

GROUND-LEVEL TRIPOD FOR TRIMBLE

This ground-level tripod is the perfect solution when you need to place your Trimble laser scanner i...

GROUND-LEVEL TRIPOD FOR FARO WITH LSE QUICK RELEASE

Do you need a scan of your objects from below? But there is no room for a scanners with tripod? Then...

GROUND-LEVEL TRIPOD FOR FARO WITH ATS/FARO QUICK RELEASE

Using this ground-level tripod, you can place your laser scanner optimally in situations when a comm...

EMLID Navio2

EMLID Navio2 Board Autopilot HAT for Raspberry Pi Powered by ArduPilot & ROS Turn your Raspberry Pi...

NESTLE GNSS TWO-SEGMENT GNSS POLE

The required accuracy in data acquisition requires the use of a professional antenna plumb bob. The ...

NESTLE two-segment GNSS pole with foot-scale

The required accuracy in data acquisition requires the use of a professional plumb bob. The carbon r...

EMLID Reach M+ RTK GNSS module

Reach M+ is a GNSS module that is particularly suitable for drone surveying (UAV). With the help of ...

AESUB YELLOW - SET OF 6 BOTTLES OF ANTI-REFLECTIVE SPRAY

Do you want to capture shiny and reflective surfaces of small objects with a 3D scanner, but don't w...

NAUTIZ X6 POLE MOUNT

Pole mount with fully adjustable RAM arm and ball. Suitable for 1- and 1.25-inch poles. Product cha...

GROUND-LEVEL TRIPOD FOR LEICA RTC360

Do you need a suitable tripod that allows you to use your Leica RTC360 in tight places? With this gr...

NESTLE TWO-SEGMENT GNSS POLE WITH FOOT-SCALE

The required accuracy in data acquisition requires the use of a professional plumb bob. The carbon r...

ALGIZ RT8 POLE MOUNT

Pole mount with fully adjustable RAM arm and ball for the Algiz RT8. Suitable for 1- and 1.25-inch p...

POLE MOUNT QUICK RELEASE

Pole mount with quick release. Suitable for 1- and 1.25-inch poles if used together with an adapter....

ARTEC EVA HARDCASE

Do you need optimal protection for your Artec EVA 3D scanner? With the hard case from Artec 3D, you...

OVERHEAD 3D SAFETY ADAPTER FOR TRIMBLE

Use the Trimble to scan safely overhead in manholes? This can be done with this adapter! You simply...

OVERHEAD 3D SAFETY ADAPTER FOR LEICA RTC 360

With the help of this adapter, you can safely scan overhead with your Leica RTC360 laser scanner, fo...

OVERHEAD 3D SAFETY ADAPTER FOR FARO FOCUS S / FOCUS M / FOCUS PREMIUM / FOCUS CORE

Do you want to use your FARO Focus scanner for overhead scanning? This adapter for overhead scanning...

OVERHEAD 3D SAFETY ADAPTER

Carry out your laser scanning project more flexible and safer. Scan under the earth's surface, too. ...

GNSS-POLE FOR EMLID REACH RS2 / RS2+ / RS+ / RX / RS3 WITH FOLDABLE CONTROL DEVICE HOLDER

The surveyor's pole from EMLID made of anodized aluminum is a true lightweight with its 0.9kg and, d...

GROUND-LEVEL TRIPOD WITH TRIBRACH

With this ground-level tripod, you can set up your laser scanner with tribrach adapter at an impress...

Set consisting of 3 Tripod Adapters for Reference Spheres (200 mm/7.9 in sphere)

The set consisting of 3 tripod adapters for reference spheres (reference sphere with a diameter of 2...

Set consisting of 3 Tripod Adapters for Reference Spheres (145 mm/5.7 in sphere)

Set consisting of 3 tripod adapters for reference spheres (reference sphere with 145 mm/5.7 in diame...

ARTEC LEO PROTECTIVE CASE

Optimize the use of your Artec Leo handheld scanner with the innovative Leo protective case – a prot...

DEUTSCHE BAHN REFERENCE SPHERE FLEXI 200MM

Large robust reference sphere for signaling fixed points of Deutsche Bahn. Product characteristics ...

NESTLE Robotic pole 260 PR-1

The robotic rod 260 is made of carbon, has special locking options for the use of heavy prisms, or ...

NESTLE Carbon GNSS pole, PG-5

The required accuracy in data collection presupposes the use of a professional plummet pole. The car...

NESTLE Carbon GNSS pole, PG-2

The required accuracy in data collection presupposes the use of a professional plummet pole. The car...

Set consisting of 5 laser scanner reference spheres Ø 90mm

Our small spheres with a diameter of 90mm support you in the registration and alignment of scans of ...

NESTLE Combi pole 350 PK-1

The double telescopic NESTLE carbon combi rod with screw clamp is easy to operate and predestined fo...

NESTLE Carbon GNSS pole PS-9

The required accuracy in data acquisition requires the use of a professional antenna plumb bob. The ...

NESTLE ROBOTIC POLE 260 PR-1

The robotic rod 260 is made of carbon, has special locking options for the use of heavy prisms, or ...

NESTLE COMBI POLE 350 PK-1

The double telescopic NESTLE carbon combi rod with screw clamp is easy to operate and predestined fo...

NESTLE CARBON GNSS POLE, PG-5

The required accuracy in data collection presupposes the use of a professional plummet pole. The car...

NESTLE CARBON GNSS POLE, PG-2

The required accuracy in data collection presupposes the use of a professional plummet pole. The car...

NESTLE CARBON GNSS POLE PS-9

The required accuracy in data acquisition requires the use of a professional antenna plumb bob. The ...

12" TABLET HOLDER SET FOR GPS POLE

Do you carry out GPS surveys and don't have a hand free for the tablet you are using when changing l...

EMLID REACH M+ RTK GNSS MODULE

Reach M+ is a GNSS module specifically suited for the field of UAV surveying. Using the 20g lightwei...

COAXIAL BRACKET FOR FARO FOCUS S & FOCUS M SCANNER

Coaxial mount with 5/8" adapter as add-on for FARO FocusS and FocusM series scanners. Simplify your...

COAXIAL BRACKET

Coaxial bracket with 5/8" connection for Trimble TX5 and FARO Focus3D X. The bracket is designed to ...

NESTLE Carbon GNSS pole, PO-9

The carbon GNSS pole PO-9 is telescopic and has only a locking at 2 m. Due to the clear, lockable he...

Coaxial Bracket

Bracket for positioning a prism on a FARO Focus3D X or Trimble TX5 laser scanner. Coaxial bracket w...

Coaxial Bracket for FARO FocusS & FocusM Scanner

Bracket for positioning a prism on a FARO Focus S X or FARO Focus M laser scanner. Coaxial mount wi...

ARTEC RAY BATTERY

With the replacement battery for the Artec RAY laser scanner you are well equipped for long projects...

AESUB BLUE - SET OF 12 CANS OF ANTI-REFLECTIVE SPRAY

The set of 12 aerosol cans AESUB blue is the more cost-effective alternative to buying individual ae...