GPS Accessories

CABLE JST-GH 6P-6P FOR PIXHAWK 2/ REACH M2/M+

This accessory cable (6-pin) connects the EMLID Reach M+/M2 GNSS module to the Pixhawk 2 UAV Control...

CABLE JST-GH TO DF13 6P-6P FOR PIXHAWK 1/ REACH M2/M+

Use this connection cable to connect the EMLID Reach M+/M2 GNSS module to the Pixhawk 1 UAV Controll...

TIP FOR GPS POLE FOR EMLID REACH

Replacement tip for EMLID survey pole. Product characteristics Material: anodized aluminum Sharp s...

TIP FOR GPS POLE (TRIANGL)

Replacement tip for TRIANGL survey pole. Product characteristics Material: anodized aluminum Sharp...

EMLID REACH M+/M2 TNC ANTENNA ADAPTER CABLE 2M

Cable of 2 meters length with a TNC connector on one side and an MCX connector on the other side to ...

EMLID REACH M+/M2 ANTENNA EXTENSION CABLE 2M

With this extension cable you connect a multi-band GNSS antenna to the EMLID Reach M2/M+. The cable ...

EMLID REACH M+/M2 SMA ANTENNA ADAPTER CABLE 0.5M

Cable of 0.5 meters length with an SMA connector on one side and an MCX connector on the other side ...

LORA ANTENNA FOR EMLID REACH RS+

With the LoRa antenna, you can send correction data over a maximum range of 10km from base to rover ...

BAG FOR CARBON ROD 031-11971

Spare bag. Only suited for the carbon rod for EMLID Reach RS2 / RS2+ / RS+ / RX. Product characteri...

EMLID REACH RS+/RS2 CABLE 2M W/O 2ND CONNECTOR (90°)

The connecting cable with L-shaped Lemo connector is used exclusively for connection to the EMLID Re...

EMLID REACH RS+/RS/RS2/RS2+/RS3 CABLE 2M W/O 2ND CONNECTOR

The connection cable with straight Lemo connector is used for connection to the EMLID Reach RS+/RS/R...

EMLID REACH RS+/RS CABLE 2M WITH DB FEMALE CONNECTOR (90°)

The connection cable with L-shaped Lemo connector is used exclusively for connecting to the EMLID Re...

EMLID REACH RS+/RS CABLE 2M WITH DB MALE CONNECTOR (90°)

The connection cable with L-shaped Lemo connector is used exclusively for connection to the EMLID Re...

EMLID REACH RS+/RS2/RS2+/RS3 CABLE 2M WITH DB9 MALE CONNECTOR

The connection cable with straight Lemo connector is used to connect to the EMLID Reach RS+/RS2/RS2+...

UHF ANTENNA 410-470 MHZ FOR EMLID REACH RS3

With the UHF antenna, you can send and receive correction data in a frequency range of 410 – 470 MHz...

EMLID REACH M2/M+ CAMERA HOT SHOE ADAPTER

With the hot shoe adapter, the EMLID Reach M+ / M2 can be connected to a camera via JST-GH cable, fo...

TALLYSMAN GNSS ANTENNA FOR REACH M+

Tallysman TW4721 is a compact, wideband Accutenna™ technology GNSS antenna that provides accurate re...

SMARTPHONE HOLDER FOR GPS RODS

You perform GPS surveys and have no hand free for the smartphone used when changing locations? Then ...

EMLID REACH M2/M+ LORA RADIO

LoRa radio allows Reach M2 and M+ to receive corrections from Reach RS2 and RS+ as base. Product ...

TRIPOD FOR GPS WITH INTEGRATED EXTENSION

This tripod, in combination with tribrach and tribrach adapter, is suitable as an setup option for G...

TRIPOD FOR GPS RODS

With the help of the tripod, you can securely fix a GPS rod so that it stands by itself like a tripo...

TRIPOD WITH 5/8" ADAPTER FOR GPS

This tripod, in combination with tribrach and tribrach adapter, is suitable as an installation optio...

7-8 INCH TABLET HOLDER SET FOR GPS POLE

Do you carry out GPS surveys and don't have a hand free for the tablet you are using when changing l...

9-11" TABLET HOLDER SET FOR GPS P

Do you carry out GPS surveys and don't have a hand free for the tablet you are using when changing l...

EMLID FLOW + SURVEY ANNUAL LICENSE

EMLID Flow is an app for land surveying in combination with EMLID GNSS antennas. Configure your dev...

NESTLE GNSS TWO-SEGMENT GNSS POLE

The required accuracy in data acquisition requires the use of a professional antenna plumb bob. The ...

MULTI-BAND ANTENNA KIT FOR EMLID REACH M2

The multi-band GNSS antenna for Reach M2 receives the L1/L2 bands on GPS, GLONASS, BeiDou and E1/E5 ...

NESTLE TWO-SEGMENT GNSS POLE WITH FOOT-SCALE

The required accuracy in data acquisition requires the use of a professional plumb bob. The carbon r...

NESTLE ROBOTIC POLE 260 PR-1

The robotic rod 260 is made of carbon, has special locking options for the use of heavy prisms, or ...

NESTLE COMBI POLE 350 PK-1

The double telescopic NESTLE carbon combi rod with screw clamp is easy to operate and predestined fo...

NESTLE CARBON GNSS POLE, PG-5

The required accuracy in data collection presupposes the use of a professional plummet pole. The car...

NESTLE CARBON GNSS POLE, PG-2

The required accuracy in data collection presupposes the use of a professional plummet pole. The car...

NESTLE CARBON GNSS POLE PS-9

The required accuracy in data acquisition requires the use of a professional antenna plumb bob. The ...

EMLID REACH M+ RTK GNSS MODULE

Reach M+ is a GNSS module specifically suited for the field of UAV surveying. Using the 20g lightwei...

NESTLE CARBON GNSS POLE, PO-9

The carbon GNSS pole PO-9 is telescopic and has only a locking at 2 m. Due to the clear, lockable he...

12" TABLET HOLDER SET FOR GPS POLE

Do you carry out GPS surveys and don't have a hand free for the tablet you are using when changing l...

EMLID REACH M2 MULTI-BAND RTK GNSS MODULE

Reach M2 is a GNSS module specifically suited for the field of UAV surveying. The 20g lightweight mo...

EMLID REACH M+ UAV MAPPING KIT

The Reach M+ UAV Mapping Kit is the ideal bundle for UAV surveys where images are georeferenced dire...

EMLID REACH M+ UAV MAPPING KIT

The Reach M+ UAV Mapping Kit is the ideal bundle for UAV surveys where images are georeferenced dire...

EMLID REACH RX

Compared to its predecessors, the EMLID Reach RX does not rely on Wi-Fi or LoRa communication – inst...

EMLID REACH RS3 MULTI-BAND RTK GNSS RECEIVER

The new Reach RS3 from Emlid makes GNSS surveying a walk in the park! The RTK GNSS receiver enables ...

EMLID REACH M2 UAV-MAPPING-KIT WITHOUT HOT SHOE ADAPTER FOR CAMERA

The Reach M2 UAV Mapping Kit is the ideal bundle for very accurate UAV surveying, supported by geore...

EMLID REACH M2 UAV-MAPPING-KIT+ WITH HOT SHOE ADAPTER FOR CAMERA

The Reach M2 UAV Mapping Kit is the ideal bundle for very accurate UAV surveying, supported by geore...

EMLID REACH M2 UAV-RTK-KIT+

The Reach M2 UAV RTK Kit is the ideal kit to make your UAV capture navigation more precise. The Reac...

NESTLE GNPS-52 ALL-IN-ONE SET

The GNPS-52 (Global NESTLE Positioning System) satellite positioning system is used for real-time RT...

EMLID REACH RS3 SURVEY-KIT

The new Reach RS3 from Emlid makes GNSS surveying a walk in the park! The RTK GNSS receiver enables ...