EMLID REACH M+ RTK GNSS MODULE

Reach M+ is a GNSS module specifically suited for the field of UAV surveying. Using the 20g lightweight module, you can easily stitch together your photogrammetric UAV imagery, with fewer ground control points required. The Reach M+, unlike the Reach M2, can only be operated with smaller baselines and fewer frequencies.

The GNSS module eliminates image capture delays until GPS measurement through the hot shoe, which connects directly to the trigger. Ground control points are now only required to verify accuracy. Like all other EMLID products, the M+ is easily controlled via an app. Recording of all logs and events is automatic; download is possible afterwards.

Product characteristics

Control via smartphone app (iOS and Android) or web interface
Receive various GNSS signals (72 channels in total):
GPS/QZSS L1
GLONASS G1
BeiDou B1
Galileo E1
SBAS
14 Hz* GPS / 5 Hz GNSS positioning rates (*with future firmware update)
Internal memory: 8GB
Input voltage on USB and JST GH 4.75V – 5.5V
Antenna DC bias 3.3V
Average consumption at 5V: 200mA
Long-range radio connection with up to 8km range
Working with long baselines possible:
RTK up to10km
PPK up to 20km
Fix solution in about 1–2 min
Dimensions: 56.4 x 45.3 x 14.6mm
Weight: 20g
Accuracies:
Static: H: 5mm + 1ppm | V: 10mm + 2ppm
Kinematic: H: 7mm + 1ppm | V: 14mm + 2ppm
Corrections: NTRIP, RTCM3
Position output: NMEA, LLH/XYZ
Delivery content

Reach M+
Charging Cable USB-A to Micro-USB
Cable OTG to Micro-USB
JST-GH 6-pin to Jumper Pin Cable
JST-GH 5-pin to Jumper Pin Cable