EMLID Reach M2 Multi-Band RTK GNSS Module

Reach M2 is a GNSS module that is particularly suitable for drone surveying (UAV). The 20g lightweight module enables your photogrammetric drone footage to be seamlessly stitched together; moreover, fewer ground control points are required. In contrast to its predecessor, the Reach M2 can be operated at larger baselines and on several frequencies.

The GNSS module eliminates delays in taking the pictures until the GPS measurement by the hot shoe, which is directly connected to the shutter release. Ground control points are now only needed to check accuracy. Like all other EMLID products, the M2 can be easily controlled via an app. All logs and events are automatically recorded and can be easily downloaded afterwards.

product properties

Control via smartphone app (iOS and Android) or web interface
Receive various GNSS signals (184 channels in total):
GPS/QZSS L1C/A, L2C
GLONASS L1OF, L2OF
BeiDou B1I, B2I
Galileo E1-B/C, E5b
20 Hz* GPS / 10 Hz GNSS positioning rates (*with future firmware update)
Internal memory 16GB
Input voltage on USB and JST GH 4.75V - 5.5V
DC Bias Antenna 3.3V
Average consumption at 5V: 200mA
Long-range radio connection with a range of up to 8 km
Working with long baselines possible:
RTK up to 60 km
PPC up to 100 km
Fix solution in about 5 seconds
Dimensions: 56.4 x 45.3 x 14.6mm
Weight: 20g
Accuracy:
Static: H: 4 mm + 0.5 ppm | V: 8mm + 1ppm
Kinematic: H: 7 mm + 1 ppm | V: 14mm + 1ppm
Correction input: NTRIP, RTCM3
Position output: NMEA, LLH/XYZ
scope of delivery

Reach M2
Micro USB cable
JST-GH 6 pin cable with jumper pin
JST-GH 5 pin cable with jumper pin