Thank you!
We will contact you shortly
DescriptionDetails & specsAttachments
Need a tripod for high-altitude scanning? Then the telescopic tripod KANGUR-Lift is an ideal solution for you. The KANGUR-Lift is a telescopic mast with which your laser scanner can reach a position up to 6 meters high. The stable lift made of anodized aluminum can be easily moved from location to location. When closed, you can easily push the lift through doors.
With the KANGUR-Lift you can even scan in places that you cannot reach with the vehicle. Thanks to the elevated position of the 3D laser scanner, you achieve a significant increase in the measuring range. This telescopic tripod is also particularly useful when you need to create scans at different heights, for example to capture complex interiors of buildings. Even when scanning facades, you can avoid shadows from balconies and thus incomplete data thanks to different scanner positions.
The system is stable even in windy conditions. Operating the KANGUR lift is so easy that only one person is required.
Product features:
Anodized aluminum telescopic mast on a cart
pneumatic operation via a hand pump
Mast can be extended to any height
Circular level and height-adjustable feet for vertical alignment of the mast
minimum height of retracted mast: 1.714 m
maximum height of fully extended mast: 6 m
maximum permitted payload: 30 kg
Dimensions: 710 x 320 x 1550mm
Weight: about 37kg
tire diameter: 260 mm; Can be moved without any problems even on uneven floors
Powered by external battery: 12V 12Ah
short assembly and disassembly time (approx. 10 min)
easy transport when closed (no assembly and disassembly of components required)
when the mast is retracted, passage through doors is possible
Ropes and fastening kit for a secure footing in moderate winds
data sheet
Areas of application:
Architecture, construction and preservation of monuments
terrain survey
Purpose of use:
Scanning at a height of up to 6 meters (any height selectable)
One-man operation sufficient during scanning
Installation of a 3D laser scanner on the KANGUR lift
Compatibility laser scanner:
The KANGUR-Lift is suitable for all 3D laser scanners with a 5/8 inch connection.
3D laser scanners with a 3/8 inch connection (e.g. FARO Focus) can be mounted using an adapter.
Scope of delivery:
1 KANGUR lift system
1 wind lock kit
1 quick release screw for standard 5/8" male thread
electrical connection for LPE16 pre-installed
Electrical kit for battery (battery not included)
1 battery charger 12V-12Ah
1 pocket for accessories
1 transport box
(LPE16 is not included)
With the KANGUR-Lift you can even scan in places that you cannot reach with the vehicle. Thanks to the elevated position of the 3D laser scanner, you achieve a significant increase in the measuring range. This telescopic tripod is also particularly useful when you need to create scans at different heights, for example to capture complex interiors of buildings. Even when scanning facades, you can avoid shadows from balconies and thus incomplete data thanks to different scanner positions.
The system is stable even in windy conditions. Operating the KANGUR lift is so easy that only one person is required.
Product features:
Anodized aluminum telescopic mast on a cart
pneumatic operation via a hand pump
Mast can be extended to any height
Circular level and height-adjustable feet for vertical alignment of the mast
minimum height of retracted mast: 1.714 m
maximum height of fully extended mast: 6 m
maximum permitted payload: 30 kg
Dimensions: 710 x 320 x 1550mm
Weight: about 37kg
tire diameter: 260 mm; Can be moved without any problems even on uneven floors
Powered by external battery: 12V 12Ah
short assembly and disassembly time (approx. 10 min)
easy transport when closed (no assembly and disassembly of components required)
when the mast is retracted, passage through doors is possible
Ropes and fastening kit for a secure footing in moderate winds
data sheet
Areas of application:
Architecture, construction and preservation of monuments
terrain survey
Purpose of use:
Scanning at a height of up to 6 meters (any height selectable)
One-man operation sufficient during scanning
Installation of a 3D laser scanner on the KANGUR lift
Compatibility laser scanner:
The KANGUR-Lift is suitable for all 3D laser scanners with a 5/8 inch connection.
3D laser scanners with a 3/8 inch connection (e.g. FARO Focus) can be mounted using an adapter.
Scope of delivery:
1 KANGUR lift system
1 wind lock kit
1 quick release screw for standard 5/8" male thread
electrical connection for LPE16 pre-installed
Electrical kit for battery (battery not included)
1 battery charger 12V-12Ah
1 pocket for accessories
1 transport box
(LPE16 is not included)
Contact our manager
Send your request and contacts and our manager will contact you.
24/7 Support
Our 24/7 Support ensures that expert assistance is always available whenever you need it, around the clock
Send Request
Ask the manager a question about delivery terms, documentation of payment options