DescriptionDetails & specsAttachments
The Optical Displacement Sensor node performs high-precision displacement measurements. These readings are then forwarded to a gateway via Senceive's wireless communications network.
The Optical Displacement Sensor node is a measurement device that uses optical instruments to perform high-precision displacement measurements. These readings are then forwarded to a gateway via Senceive's wireless communications network.
The distance measurement provides information about the deformation of a targeted structure and the tilt measurement informs the user about the stability of the sensor itself and the reference structure to which it is mounted.
Optical displacement measurement is ideal for many structural and geotechnical monitoring applications, including measurements.
product properties
Fully integrated unit
Extremely quiet performance
Optical sensor resolution of 0.1mm and repeatability of ±0.15mm
Triaxial inclinometer with a resolution of 0.0001° (0.0018 mm/m) and a repeatability of ±0.0005° (±0.009 mm/m)
Integrated long life battery
10-year battery life, also as a relay node within the meshed communication network
Easy targeting when using magnet triggered aiming mode
Integrated temperature sensor
Versatile mounting options
Waterproof according to IP66/IP67/IP68
Firmware can be updated remotely via the gateway, reducing costly on-site visitsPhysical Specifications
value
Dimensions without antenna 90 x 90 x 60 mm
90 x 96 x 60 mm (including valve)
Weight about 0.6 kg
Housing material Die-cast aluminium
protection
IP66 / IP67
IP68 at 1m height for 24 hours
Mounting options Through holes for M4 Allen screw in the base, M4 blind holes on the side.
Plates and brackets available for magnetic attachment, track bed, pole and pole attachment and many other applications
Operating temperature range -10°C to +50°C (full functionality)
-25°C to +70°C (network, temperature and tilt only)
Optical sensor specifications
value
Resolution 0.1mm
Repeatability ±0.15mm
Range 50 m (natural surface)
100 m (white target)
150 m (reflective target)
Laser type Class 2, 655nm (visible red)
Tilt Sensor Specifications
(-IX version)
value
Resolution 0.0001° (0.00175mm/m)
Repeatability ±0.0005° (±0.0087mm/m)
Range ±90°
areas of application
Convergence/divergence for tunnel/arch inner reveal or bridge abutment
Vertical movements for structural settlement/heaving
Lateral movements such as track swings of the rail
Earthworks and embankment movement
Water level/drainage monitoring
If you are interested in a monitoring solution for your project, please contact us! Our experts will be happy to advise you on your specific application and create a solution for you according to your specific requirements.
The Optical Displacement Sensor node is a measurement device that uses optical instruments to perform high-precision displacement measurements. These readings are then forwarded to a gateway via Senceive's wireless communications network.
The distance measurement provides information about the deformation of a targeted structure and the tilt measurement informs the user about the stability of the sensor itself and the reference structure to which it is mounted.
Optical displacement measurement is ideal for many structural and geotechnical monitoring applications, including measurements.
product properties
Fully integrated unit
Extremely quiet performance
Optical sensor resolution of 0.1mm and repeatability of ±0.15mm
Triaxial inclinometer with a resolution of 0.0001° (0.0018 mm/m) and a repeatability of ±0.0005° (±0.009 mm/m)
Integrated long life battery
10-year battery life, also as a relay node within the meshed communication network
Easy targeting when using magnet triggered aiming mode
Integrated temperature sensor
Versatile mounting options
Waterproof according to IP66/IP67/IP68
Firmware can be updated remotely via the gateway, reducing costly on-site visitsPhysical Specifications
value
Dimensions without antenna 90 x 90 x 60 mm
90 x 96 x 60 mm (including valve)
Weight about 0.6 kg
Housing material Die-cast aluminium
protection
IP66 / IP67
IP68 at 1m height for 24 hours
Mounting options Through holes for M4 Allen screw in the base, M4 blind holes on the side.
Plates and brackets available for magnetic attachment, track bed, pole and pole attachment and many other applications
Operating temperature range -10°C to +50°C (full functionality)
-25°C to +70°C (network, temperature and tilt only)
Optical sensor specifications
value
Resolution 0.1mm
Repeatability ±0.15mm
Range 50 m (natural surface)
100 m (white target)
150 m (reflective target)
Laser type Class 2, 655nm (visible red)
Tilt Sensor Specifications
(-IX version)
value
Resolution 0.0001° (0.00175mm/m)
Repeatability ±0.0005° (±0.0087mm/m)
Range ±90°
areas of application
Convergence/divergence for tunnel/arch inner reveal or bridge abutment
Vertical movements for structural settlement/heaving
Lateral movements such as track swings of the rail
Earthworks and embankment movement
Water level/drainage monitoring
If you are interested in a monitoring solution for your project, please contact us! Our experts will be happy to advise you on your specific application and create a solution for you according to your specific requirements.
Free Shipping
24/7 Support
Easy Payment
Fast Delivery